Hi new to the club. I just wanted to pass on what I found out about the red covered toggle switch in my console. I recently purchased a 2015 Cherokee latitude V6 motor. Discovered that up until 2018 Jeep sold a Mopar wiring kit to stop death wobble when yo flat tow your Jeep.I hope this helps someone else that has such a toggle switch. Thanks Ray
yaR
2020 Cherokee Trailhawk 2.0L Turbo Tow Package Flat Towed
Joined
·
127 Posts
Welcome to the club!
Yes, the red toggle is to enable the wiring harness to supply power to the steering when flat towing behind a motorhome. There should also be a 10a fuse (or another switch) in the engine compartment that you have to install to enable towing mode. Search for "death wobble" here or elsewhere to get more information if you plan to flat tow.
Yes, the red toggle is to enable the wiring harness to supply power to the steering when flat towing behind a motorhome. There should also be a 10a fuse (or another switch) in the engine compartment that you have to install to enable towing mode. Search for "death wobble" here or elsewhere to get more information if you plan to flat tow.
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
