How did you take the back seat out? Here in Germany I cannot find any description. Thanks in advance. NilsPrompted by a question by @PunkTexas in the remove rear seat thread I figured I'd reply with a separate thread so to not clutter up the original.
I'm still working on my setup, but this is what I have so far. I'll post more pictures as the project progresses (slowly).
I've taken out the stock trunk floor and wheel well mold and made a new plywood platform. This is a temporary, quickly bodged-together setup on to of that platform.
View attachment 211654
This is the setup I've build in the wheel well space. Up left is a compressor, 2nd battery to the right of it. Below the compressor is a water pump with a 5 gal water tank in the middle. Storage rooms to the right and below the water tank, where the air hose, fuses, and a switch to turn on the air pump is located.
View attachment 211655
Another shot of a variant of the temporary setup, with the compressor in action.
View attachment 211657
Dimmable red/white LED lighting.
View attachment 211656
Carpeted flooring with access panels to the under-floor installations (held in place by magnets glued into the floor base). The fridge, which is accessible from the right rear door (seat removed), is visible to the upper right.
View attachment 211658
Halfway getting the stove and grill arrangement built.
View attachment 211659
Cooking arrangement in it's "transport" location. Back of fridge to the left.
View attachment 211660