2014+ Jeep Cherokee Forums banner

No MAF sensor!?

8587 Views 15 Replies 12 Participants Last post by  dgc334
I went to clean the MAF sensor on my '19 Cherokee latitude 2.4. I disconne ted the tube at the air filter box and no maf sensor!? Could someone tell me where it is or does it even have one. Thank you.
1 - 16 of 16 Posts
Searched moparonlineparts.com for "sensor mass airflow" and didn't find anything.
Maybe it does not have one. I don't have a clue. I don't have a 2019 or a 2.4L.
Emission components in the USA are warranted for 100K miles so I wouldn't worry about it. If I am wrong someone will beat up on me.
I have a 2014 V6. Don't have any idea if it has a MAF sensor. If it does I have never had a problem with it.
If your MAF sensor, if it exists, has a problem you will get a check engine light, guaranteed.
Thank you sanghill. I don't have a problem with it. I just figured it could use a cleaning. After all I've got 62000 miles on it.


.
The V6 doesn’t use one for the record, so you should only find it for 2.4.

Not sure about the 2.0.


Sent from my iPad using Tapatalk
Thanks jeepfan 4×4. Now where would I find it? It's not near the air filter box, as I figured it would be. Maybe the 2.4 doesn't have one either!? Anyone out there no?
Thanks jeepfan 4×4. Now where would I find it? It's not near the air filter box, as I figured it would be. Maybe the 2.4 doesn't have one either!? Anyone out there no?
User Turbo2.0 already posted a link. According to the diagram in his link, it's part 10 on the diagram.

Attachments

See less See more
2
I went to clean the MAF sensor on my '19 Cherokee latitude 2.4. I disconne ted the tube at the air filter box and no maf sensor!? Could someone tell me where it is or does it even have one. Thank you.
No MAF sensor.
See less See more
I went to clean the MAF sensor on my '19 Cherokee latitude 2.4. I disconne ted the tube at the air filter box and no maf sensor!? Could someone tell me where it is or does it even have one. Thank you.
I have the same issue..2017 jeep Cherokee latitude 2.4l..getting p2000 and p0104 code says possible bad MAF...parts stores show one but it's not anywhere I can find....the place, where one should be, is missing never installed. found the Air temp sensor but no MAF... air leak or bad filter...i noticed a few bolts missing from the air filter box sure these oil change places love to check em but one didnt replace the bolts....going to fix that and replace the filter....? Any suggestions?
Its a Speed Density system........MAP sensor no MAFs
  • Like
Reactions: 1
I have the same issue..2017 jeep Cherokee latitude 2.4l..getting p2000 and p0104 code says possible bad MAF...parts stores show one but it's not anywhere I can find....the place, where one should be, is missing never installed. found the Air temp sensor but no MAF... air leak or bad filter...i noticed a few bolts missing from the air filter box sure these oil change places love to check em but one didnt replace the bolts....going to fix that and replace the filter....? Any suggestions?
Map sensor is on the intake manifold on the passenger side of vehicle toward the bottom. Can be serviced by removing the air filter box or access from underneath the vehicle
I went to clean the MAF sensor on my '19 Cherokee latitude 2.4. I disconne ted the tube at the air filter box and no maf sensor!? Could someone tell me where it is or does it even have one. Thank you.
Map sensor is on the intake manifold on the passenger side of vehicle toward the bottom. Can be serviced by removing the air filter box or access from underneath the vehicle
I wish someone had a clear picture of where is was so I can get my hands on it to clean it
MAP and MAF sensors measure airflow coming into the engine so they're almost always on the intake manifold often near an air temp sensor (they work in combination to determine how dense the incoming air is so the ECU can inject the proper amount of fuel). I have the V6 so my location is different (it's on the upper intake manifold). On a 2.4 the intake manifold is on the back side of the engine I think (facing the firewall). According to the service manual the location is shown by #2 below.

See less See more
  • Like
Reactions: 1
MAP and MAF sensors measure airflow coming into the engine so they're almost always on the intake manifold often near an air temp sensor (they work in combination to determine how dense the incoming air is so the ECU can inject the proper amount of fuel). I have the V6 so my location is different (it's on the upper intake manifold). On a 2.4 the intake manifold is on the back side of the engine I think (facing the firewall). According to the service manual the location is shown by #2 below.

View attachment 224300
FWIW, Mass Air Flow (MAF) sensors are always in the intake stream before the throttle body. Manifold Absolute Pressure (MAP) sensors are always in the intake manifold.

Sent from my motorola edge plus (2022) using Tapatalk
1 - 16 of 16 Posts
Top